In-House Measuring Gages

We have two Coordinate Measuring Machines – Hexagon CMMs are the most advanced inspection package available that provides the combined performance of accuracy and speed. It comes standard with a high performance analog scanning probe, advanced software with CAD (27.56″ x 39.37″ x 25.98″  XYZ respectively)


The following are some of the gages we have to inspect your products. The list is not all inclusive, but it will give you an idea of what we have. We also have tapered plug gages to inspect taper bores.


  • OD Micrometers (digital): 0 to 30 inches
    • Depth Micrometers (digital): 0 to 12 inches
    • Calipers (digital): 0 to 40 inches
    • 36×36-inch granite block
    • Accudex spin table and indexer
    • Dial bore gages 18″

Tapered Plug Gage Inventory

Tapered bore plug gage inventory

Abbreviation Legend


Gage#  |  Identification number of the plug gage

TPF  |  Taper Per Foot

Note  | Dimensions are in inches


  • Gage #
  • F28
  • E055
  • E079
  • E141
  • E038
  • E054
  • E80
  • E69
  • B073
  • B072
  • B203
  • B069
  • B092
  • B078
  • B205
  • B207
  • B212
  • B8
  • B030
  • B098
  • A017
  • A035
  • A053
  • Large End
  • 1.9305
  • 1.8524
  • 2.3719
  • 2.6231
  • 3.1572
  • 3.397
  • 4.2386
  • 4.7158
  • 1.329
  • 2.4452
  • 2.7501
  • 3.0002
  • 3.1759
  • 3.2586
  • 3.2723
  • 3.371
  • 3.9646
  • 4.2399
  • 4.5972
  • 5.0602
  • 1.6204
  • 2.7134
  • 4.2272
  • Small End
  • 1.7133
  • 1.6608
  • 2.1055
  • 2.3593
  • 2.8614
  • 3.159
  • 3.857
  • 4.3798
  • 1.0427
  • 1.9691
  • 2.32
  • 2.494
  • 2.7205
  • 2.8982
  • 2.9116
  • 2.852
  • 3.4439
  • 3.7188
  • 4.0253
  • 4.4616
  • 1.3383
  • 2.2136
  • 3.6713
  • Taper
  • .625 TPF
  • .75 TPF
  • .75 TPF
  • .75 TPF
  • .75 TPF
  • .75 TPF
  • .75 TPF
  • .75 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.25 TPF
  • 1.50 TPF
  • 1.50 TPF
  • 1.50 TPF